Lighting supplier Haneco has opened its new national headquarters at the $50 million Marleston Hub in Adelaide’s inner west, 15 years after the company started in South Australia with a single warehouse. The Marleston facility pulls the company’s South Australian warehouse and its national teams into one building.

Electrical Connection reported the opening, noting Haneco has grown from that 2011 warehouse into one of Australia’s larger lighting companies. Haneco employs close to 100 people nationally, with about half its workforce based in South Australia, Electrical Connection reported in November 2026.

The building was put up by South Australian family-owned firm Bella Build and Design, and sits inside a new inner-west industrial precinct.

”A vote of confidence in the state”

Haneco founder and director Nicho Teng linked the move to the state’s spending on infrastructure, defence, space and advanced industry, including the $15.4 billion transformation of nearby South Road.

“South Australia is investing in its future on a scale we haven’t seen before, and that creates real opportunity for businesses like ours,” he says.

“We started here in 2011, we’ve deliberately kept our national headquarters in Adelaide, and choosing Marleston as our new home is a vote of confidence in the state.”

Teng has also backed several South Australian property projects, among them the redevelopment of Adelaide’s historic General Post Office into the city’s first Marriott hotel, and the former Balfours site, now a residential urban-regeneration job.

The South Australian government’s South Road works run close by, which is part of why the inner west has turned into industrial land worth building on.

What’s actually under the roof

This is the bit that matters to anyone who buys lighting for a living. The new headquarters houses customer service, operations, finance, engineering, procurement and support staff, plus the company’s compliance and warranty functions and a lighting showroom.

Compliance and warranty sitting in the same building as the warehouse is not a small detail. When a batch of downlights flickers out of a ceiling grid six months after handover, the back-and-forth over whether it’s a product fault or an install fault is usually the slow part, not the swap-out. One address holding the stock, the paperwork and the engineers is at least a shorter chain to chase.

An electrician in hi-vis installing LED downlights into a commercial suspended ceiling grid.
Whoever picks the fitting, installing fixed lighting is licensed electrical work in every state and territory. (Representative image) Illustration: Blue Collar News

A showroom does a different job again. Spec’ing a fitout off a data sheet is guesswork on colour temperature and glare, and the client only reacts once the fittings are in and energised. Standing a builder or a shop owner in front of a wall of lit samples before the order goes in is how you avoid pulling 60 fittings back out.

Worth saying plainly: whoever picks the fitting, installing fixed lighting is licensed electrical work in every Australian state and territory. A showroom sale doesn’t change who’s allowed to terminate it.

South Australia’s switch-making past

There’s a longer thread here. South Australia built the electrical gear the rest of the country wired in for decades, with Clipsal, known for developing the first all-Australian switch, and Legend among the established local names.

That heritage has thinned over the years as manufacturing moved offshore. A lighting company choosing to keep its head office, warehouse and engineering staff in Adelaide rather than drifting to Sydney or Melbourne is a counterweight to it, even if the product itself travels a long way before it reaches the racks.

What to watch

For South Australian electrical contractors, the practical question is stock. A national distribution point in your own city should mean the fast-moving lines are on the shelf in Adelaide rather than freighted in, and that’s the sort of thing you only find out on a Friday afternoon when a job’s short six battens.

The other thing to keep an eye on is the precinct itself. Marleston is a new industrial estate, not a finished one, and the tenants who follow Haneco in will decide how much warehouse, switchboard and lighting work the inner west throws off over the next few years.

Frequently asked questions

Where is Haneco’s new national headquarters?

It’s at the $50 million Marleston Hub in Adelaide’s inner west, a building put up by South Australian family-owned firm Bella Build and Design.

What’s inside the new Haneco building?

Customer service, operations, finance, engineering, procurement and support staff, plus the company’s compliance and warranty functions and a lighting showroom.

Do I still need a licensed electrician to install lighting bought from a showroom?

Yes. Installing fixed lighting is licensed electrical work in every Australian state and territory, regardless of where the fitting was purchased.

How many people does Haneco employ?

Close to 100 people nationally, with about half its workforce based in South Australia, according to Electrical Connection.


Sourced from Electrical Connection. Original article.