Kubota has launched three new Dash-5 compact excavators in Australia, with the U55-5, KX057-5 and KX080-5 now available through its national dealer network and replacing the outgoing model in each size class. Maximum digging depth runs from 3,630mm on the smallest of the three up to roughly 4,600mm on the KX080-5, which becomes Kubota’s largest and most powerful compact machine.
Trade title Electrical Connection reported the three models are aimed at civil, utility, landscaping and residential contractors, with each one pitched at a different kind of site. All three get a larger, quieter cab, a full-colour LCD monitor, keyless start and updated engine management built around fuel efficiency.
Kubota sales manager of construction and power equipment Nathan Thomas said the range answers what operators have been chasing.
“Our customers have been asking for this range for a long time, and the Dash-5 delivers. These three models bring the technology operators now expect, like a full-colour LCD display and keyless start, along with a quieter, more comfortable cab and smarter fuel efficiency.”
Thomas said the technology was built around what operators had been asking for, including the display, keyless start and cab comfort upgrades.
U55-5: the one for working against a boundary
The U55-5 is a reduced tail swing machine, built for digging close to buildings, fences and traffic. That geometry is the entire pitch. Reduced tail swing keeps the counterweight tucked in through most of the slew arc, so an operator can turn in a narrow side setback without tracking the machine backwards and forwards to clear the neighbour’s fence every second bucket.
Power comes from a 35.5kW (47.6hp) Kubota V2607 Common Rail diesel. It digs to 3,630mm and dumps at about 4,000mm, and it’s offered in both canopy and cab configurations.
Kubota says the redesigned cab gives 20 per cent more viewing area, with double-adjustable seating and lower noise and vibration. A rear-view camera and an air suspension seat sit on the options list.
KX057-5: conventional tail swing, more bite
The KX057-5 replaces the KX057-4 and sticks with a conventional tail swing, which is the trade-off you make when digging power and stability matter more than squeezing against a boundary.
It runs the same 35.5kW engine as the U55-5 but digs deeper, to 3,875mm, with a bucket breakout force of 4,614kg. Kubota is pointing it at trenching, bulk excavation and site preparation.

Inside, there’s a 7-inch full-colour LCD screen with a Jog Dial, and keyless start that fires the engine off a four-digit code. Up to ten user passwords can be programmed, which Kubota says removes the need for operators to share physical keys. On a job running two or three operators across a week, that’s one less thing to chase at 6:30 in the morning.
KX080-5: the flagship compact
At the top of the range, the KX080-5 replaces the KX080-3S. The air suspension seat, 7-inch LCD monitor, keyless start and a factory-fitted rear-view camera all come as standard rather than as a dealer add-on.
Its 49.7kW (66.6hp) Kubota V3307 Common Rail turbo diesel delivers a maximum digging depth of around 4,600mm, a dump height of 5,250mm and a bucket breakout force of roughly 6,650kg. Primary auxiliary flow is rated at 100L/min to support demanding hydraulic attachments.
That auxiliary number is the first spec to check if you already own gear. Flow rate, not machine weight, decides whether a breaker, auger or mulching head will run at the duty it was built for, so it’s worth putting the 100L/min figure next to the data plate on the attachments already in the yard before anyone signs anything.
The KX080-5 also carries a two-pump load-sensing system to smooth out simultaneous movements, auto-shift travel that adjusts speed to terrain and load, and Engine Auto Stop and Auto Idle to cut fuel burn while the machine sits.
Cab noise and the daily checks
Kubota rates cab noise on the KX080-5 at 72dBA, according to specifications published by Electrical Connection in November 2026. For a bloke spending eight or nine hours a day in the seat, that figure does more for fatigue than most of the dash gadgets, and it’s one of the few comfort claims on a brochure that comes with an actual number attached. Workplace noise exposure duties are set out by Safe Work Australia and the state regulators, and they apply regardless of what the cab is rated at.

The other practical detail: all three service panels on the KX080-5 can be opened at once, so the daily pre-start checks happen in one pass rather than three.
Thomas said the company is keen to see the machines working.
“We can’t wait to see them on job sites across the country, helping contractors get more done every day.”
What to watch
Kubota hasn’t published pricing in the launch material, so the real comparison will happen at the dealership, where the gap between a canopy U55-5 and a fully optioned cab version can change the sums on a one-machine business.
If your work is infill blocks, pool digs and renovation cut, tail swing is the deciding feature and the U55-5 is the one to book a demo on. If it’s service trenching and bulk dig on open ground, the KX057-5’s extra 245mm of depth and higher breakout force will matter more than the ability to spin tight. And if you’re running attachments hard, take the hydraulic flow rate to the demo and test with your own breaker on the end, not the dealer’s bucket.
Frequently asked questions
What’s the difference between the U55-5 and the KX057-5?
The U55-5 is a reduced tail swing machine built for digging close to fences and buildings, while the KX057-5 keeps a conventional tail swing and digs deeper (3,875mm versus 3,630mm) with more breakout force, making it better suited to trenching and bulk excavation.
How much do the Kubota Dash-5 excavators cost?
Kubota hasn’t published pricing for the U55-5, KX057-5 or KX080-5 in the launch material, so buyers will need to check with a dealer.
What is the auxiliary hydraulic flow rate on the KX080-5?
The KX080-5’s primary auxiliary flow is rated at 100L/min, which determines whether attachments like breakers, augers or mulching heads run at the duty they were built for.
How noisy is the KX080-5 cab?
Cab noise on the KX080-5 is rated at 72dBA, according to specifications published by Electrical Connection.
Sourced from Electrical Connection. Original article.